PT Adhireksa Inticor

sql
Pasir Flux Welding Taishan Sunlight SJ301
Hover to Zoom

12 Agt 2020
China
1 Pack
IDR CALL

Spesifikasi

Pasir Flux Welding Taishan Sunlight SJ301

Kami menyediakan berbagai jenis flux untuk pengelasan, salah satunya adalah model TY-SJ301 pabrikan Taishan Sunlight. Taishan Sunlight berpengalaman dalam merancang dan mengembangkan welding flux dengan berbagai keunggulannya.


Detil:
Model: TY-SJ301
Specification: EN760 SA CS 1 89 AC H5
                        AWS A5. 17 F6A0-EL8 F7A2-EM12K
 
Application:
Butt adn flat fillet welding of miniature LPG tanks, ships, vehicles, agricultural implements, machinery, boilers, bridges, structural steel.

Characteristics:
TY-SJ301 is an agglomerated calcium-silicate type welding flux.
Metallurgical behavior: High silicon pick-up is obtained. When the manganese content in wire is less than 1.5%, also a manganese pick-up.
Grain size: 10 to 60 mesh
Basicity: 1.0 (BIIW)
Regularly shaped welds are deposites whitout reduction of area or interface notches. Slag darachability is good. A short slag is produced, thus allowing circumferential welding on smal - diameter workplaces whitout the risk of uncontrolled slag.
The production of large pipes (especially spiral pipe welding) is a typical application for this flux.
Relatively high manganese pick-up is obtained, thus allowing the flux to be used with wires with a low Mn content.
As the bulk density is low, so is the consumption rate.
Damp flux welding should be re-dried at 300-350 degree Celcius for 2 hours. Rust, grease and moisture on the weldment should be removed before welding.

Chemical and Mechanical Compotition of SJ301(%):

Ulasan

/5
Ulasan
5
4
3
2
1

Foto dari Pembeli

Ulasan dari Pembeli

Filter
Semua
Dengan Foto
5
4
3
2
1
Telepon
Minta Penawaran
Produk Siap di Pesan
Rp 0
1
Bendera Indonesia Indonesia  |  Bendera Inggris English
Ingin menghubungi kami?
Klik tombol dibawah
Logo IDT
Chatbot