Kembali
Kembali

PT Adhireksa Inticor

sql

Pasir Flux Welding Taishan Sunlight SJ501

Rp. 100
Update Terakhir
21 Sep 2021
Pembelian Min
1 Pack
Kategori
Kawat Las

Spesifikasi Pasir Flux Welding Taishan Sunlight SJ501

Jual Pasir Flux Welding Taishan

Flux welding atau juga dikenal dengan istilah Flux cored arc welding (FCAW) merupakan salah satu komponen dalam pengelasan dan berperan sebagai elektroda dimana terdapat serbuk flux di dalam batangnya. Flux cored arc welding atau FCAW merupakan kombinasi antara proses SMAW, GMAW dan SAW.
Kami menyediakan berbagai model Flux Welding Taishan Sunlight, salah satunya adalah FLUX TY-SJ501.

Detil:
Model: TY-SJ501
Specification: EN760 SA AR 1 88 AC H5
                        AWS A5. 17/5.23 F7A0-EL12 F7A2-EM12K
 
Application:
Butt adn flat fillet welding of miniature LPG tanks, ships, vehicles, agricultural implements, machinery, boilers, bridges, structural steel.

Characteristics:
TY-SJ501 is an agglomerated aluminate-rutile type flux.
Metallurgical behavior: High silicon pick-up is obtained.
Grain size: 10 to 60 mesh
Basicity: 0.7 (BIIW)
The welding performance is excellent.
Slag detachability is very good, especially at high speed.
Welding porosity scarcelty occur.
Its welding speed can travel up 120 cm/min. It is particularly useful for welding tube-web-tube joints of finned tubes.
TY-SJ501 is useful for welding thin plate in single pass and limited pass.
The flux has low moisture pick up and granular stability. As the bulk is low, so is the consumption rate.
Damp flux should be re-dried at 300-350 degree celcius. Rust, grease and moisture on the weldment should be removed before welding.
Lihat Selengkapnya

Untuk keterangan lebih lanjut, silahkan download PDF ini :

Ulasan

/5
Ulasan
5
4
3
2
1

Foto dari Pembeli

Ulasan dari Pembeli

Filter
Semua
Dengan Foto
5
4
3
2
1
Minta Penawaran
Produk Siap di Pesan
Rp 0
1
Logo IDT
Chatbot